Home / Battery Storage
Store the energy your panels produce at midday and use it when you need it most — in the evening, overnight or during an outage. We design hybrid systems with lithium batteries that are safe, quiet and sized to your critical loads.
A hybrid system decides, second by second, where every watt should go. Here is the path your energy takes.
Your array converts sunlight into DC electricity throughout the day.
The hybrid inverter powers your loads first, then directs surplus to the battery.
Lithium iron phosphate cells store energy safely for evening and backup use.
When the sun sets or the grid fails, stored energy supplies your chosen circuits.
Batteries are excellent technology, but they are not always the best first investment. We will tell you honestly whether storage pays off for your situation. It usually does when one or more of the following apply:
If none of these apply, a well-sized on-grid system may give you a faster return — and we can make it battery-ready for later.
We specify LFP chemistry for its thermal stability, long cycle life and tolerance of warm climates. Batteries are installed in ventilated, accessible locations with dedicated protection and isolation.
Keeps the circuits that matter running through outages without sizing for the whole building.
Covers most household or office loads and maximises use of your own solar every evening.
For sites without dependable grid supply, sized for full autonomy with generator support.
It depends on the battery capacity and which circuits you back up. We calculate this during design: you will see an estimate in hours for your chosen loads, so there are no surprises when the power goes out.
Quality LFP batteries are typically rated for several thousand charge cycles and carry manufacturer warranties of around ten years, depending on the brand. Real-world life depends on depth of discharge and temperature, both of which we design for.
Usually, yes. Depending on your current inverter, we either add an AC-coupled battery system or replace the inverter with a hybrid unit. We will inspect your system and recommend the simplest route.
LFP chemistry is one of the most stable battery types available. We install batteries with dedicated protection, correct ventilation and clearances, and in locations agreed with you during the survey.
Tell us which loads matter most. We will size a battery system that covers them — no more, no less.