SolarUre

Home  /  Solar Maintenance

System Care

Solar Panel Maintenance and Repair

Dust, loose connections and ageing components quietly erode the output of a solar system. Our maintenance team keeps your panels clean, your wiring safe and your yield where it should be — for systems we installed and for those we did not.

Warning Signs

Is Your System Asking for Attention?

Solar systems rarely fail all at once. Output usually slips gradually, which is why problems often go unnoticed for months. Book an inspection if you notice any of these:

Falling generation

Output noticeably lower than the same month last year.

Inverter error codes

Warning lights, fault messages or frequent restarts.

Heavy soiling

Dust, bird droppings or leaf build-up on the glass.

Hot or discoloured parts

Burn marks, melted connectors or browning on panels.

Solar technician adjusting photovoltaic panels on a rooftop
What a Visit Includes

Our Maintenance Checklist

Every maintenance visit follows a documented checklist and ends with a written report, so you know exactly what was found and what was done.

01

Panel cleaning

Soft-brush and low-pressure water cleaning that will not scratch glass or void warranties.

02

Visual inspection

Checks for cracked glass, delamination, hot spots and frame damage.

03

Thermal imaging

Infrared scan to reveal failing cells, bypass diodes and overheating joints.

04

Mounting and fixings

Torque checks on clamps and rails and inspection of roof waterproofing.

05

Electrical testing

Insulation resistance, string voltage and current compared against baseline.

06

Inverter health

Firmware, fault logs, cooling and protection settings reviewed.

07

Safety devices

Isolators, surge protection and earthing tested for correct operation.

08

Written report

Findings, photos, actions taken and recommendations for the next visit.

Maintenance Plans

Pick the Level of Care That Suits You

One-Off Health Check

Single visit

Ideal if your system has never been serviced or you have noticed a drop in output.

Annual Care

Most popular

Scheduled visits plus remote monitoring to keep your system performing year after year.

Commercial O&M

For businesses

A tailored operations and maintenance contract for larger arrays and critical sites.

Plans are quoted per system after a short assessment. Contact us with your system size and location of panels on the building, and we will recommend the right level of care.

Repairs

We Fix Problems Others Left Behind

A large share of our repair work comes from systems installed by other companies. We trace faults methodically — from string-level testing to connector inspection — and fix the root cause rather than resetting the inverter and hoping. Common repairs include replacing damaged MC4 connectors, re-terminating overheated cables, correcting earthing faults, replacing failed inverters and re-securing loose mounting.

Start Your Project

Get Your System Back to Full Strength

Book a health check and receive a written report on the condition and performance of your solar system.